Meter Reading Instructions

SHARP MODELS:

  • AR-150, 151, 155, 160, 161, 162S, 163, 164, 200, 201, 205, 207:  Hold down the “0” button.
  • AR-168/S,  208S/D, MXB201D : Menu key, arrow RIGHT to total count and ENTER/OK for the total.
  • AR-M160, M162, M207, M208N, M235, M237, M257 M275, M277, M280, M350, P350, M355, M450, and M455: Hold down the button that says “COPY” and give total count.
  • AR-250, 280, 281, 285, 286, 287, 335, 336, 377, 405, 505, and 507:  Program, Interrupt, Clear, Interrupt, 22, Start, 1, Start.  Take counter data display total.
  • AR-350, 450P: Hit menu 2 times, customer settings, press OK ,arrow down 3 times, total count, OK twice
  • AR-BC260, 260M, 320:  Custom settings, total count, & print.  Counts needed: Copies F. Color, Copies S. Color, Copies B/W, Prints F. Color, Prints B/W, Others B/W, others F. color. If they have the following: add  Faxes Rec'd B/W.
  • M/MX Series – Black and white machines – hold down button that says the word “COPY”,  give TOTAL COUNT.
  • M/MX Series – B&W or COLOR Machines – System settings, Total Count, Job Count.  Give total BLACK AND WHITE and total FULL COLOR (These reports may be printed and sent to us.)
  • MX Color Series –MODELS ending in 10 or 11 – Press blue home button 2 times, OR, settings, system settings-Total Count - We need Total B&W and Total Full Color

 

CANON MODELS:

  • IR-1310, 1330, 1610, 1630, 1670: Additional function, right arrow to count, set/enter for the total
  • BLACK AND WHITE MACHINES: Press counter check button, list 102 meter. If no 102 meter, list 101 & 103 counts. (use for most Canon B&W copiers)
  • IR-330, 550, 600: Open door, counters (3) inside, highest meter needed.
  • COLOR MACHINES: Press counter check button, give 106 & 109 meters, or 105 and 108 meters (use for most Canon Color copier – these reports can be printed and sent tous)
  • IR-C5030, 5035, 5051, 5054, 7055, 7065, 9065, 9075: Hold down the button on the side with “123” above it and give the 106 and 109 totals.
  • CLC-1120, 1180, 4000, 5000: Open door, Upper left odometers, take the Total and Total black meters.

 

MURATEC MODELS:

  • F116: Press MENU, reports, arrow to SYSTEM DATA LIST, start. 
  • MFX-1200, 1300, 1600: Program, *, 9, enter, far left, lift flap, 05/E for pages printed.                  
  • MFX -1330, 1330D, 1350D, 1950:  Menu, 2,1,1,1, enter   Give total prints   
  • MFX 1700:  Hold down the copy button.
  • MFX-525, 565, 1430, 1450, 2030. 2350:  Settings key, counter, total pages printed.            
  • MFX 2550, 2570:  Press MFP button, machine info, give page count.
  • MFX 2700 – Settings Key, Reports, System, MFP Usage, Yes – Report prints-Give COLOR and MONO  Impressions                               
  • MFX 2830, 2880: Settings Key, *, 0, 9, Life Monitor, List Print Pages   
  • MFX4550: On touch screen: Machine set up, machine status, machine info tab, print report, scroll to counter info (right side) highlight, print, TOTAL IMPRESSIONS IS THE METER.

 

KIP PRINTERS:

  • Most have a meter on the outside of the machineOR Press Home (?)- Give Meter A

 

KYOCERA MITA

  • FS1128, 1135, 2026, 2126, 2626- Press System Menu, scroll to counter, press OK, then printed pages, OK, by function, OK   Then scroll all the way  right to give total printed pages.

 

HP Printers

  • (most models) Press Select or Menu, Arrow to Configuration Page. List Page Count or Engine Cycles


Questions: Call 610-378-0101 Press 0, ask for Contracts Dept. FAX 610-375-8836


Please use the form below to submit your meter reads:

Category: